707 LE
Paul and I have been talking to our BM. dealer for 2 years now about a 707 le.A few months ago BM said yes and should have a proto for us at shot.The knife should be out 6-8 wks after.
It will have blue alum. with cf or g 10 insert in silver or light gray,m390 satin blade and bright hardware. We will let everyone know how Matt wants to do orders when knife comes out.
The count will be 125 and all forum members will have a chance to get one, price should not be bad at all.
It will have blue alum. with cf or g 10 insert in silver or light gray,m390 satin blade and bright hardware. We will let everyone know how Matt wants to do orders when knife comes out.
The count will be 125 and all forum members will have a chance to get one, price should not be bad at all.
0
-
I'm not really interested in D2, but I'd even go for an S30V if M4 and M390 were off the table. I like that steel a lot. 0 -
D2 is good. It would be appropriate for a "Good Edition", therefore. But M4, M390… those are special. You know, for special editions. 
0 -
I wouldn't be interested in it with D2 either. I might go for it with S30V, but I'd much rather have M390 or M4, even if it meant waiting awhile. 0 -
I guess I'm a steel snob? 
M390 or M4 or I'm not interested.0 -
quote:Originally posted by Keyman:
I guess I'm a steel snob?
M390 or M4 or I'm not interested.
Your the man .......Us steel snobs have to stick together.
I basically feel the same way.0 -
I feel so oppressed because I still like 440C... 0 -
If you guys who normally get one wouldn't because it had a steel that was not the newest kid on the block, it really would make it a limited edition would it not? 
0 -
I would only really be interested in an S30V to replace my 154CM 707, and it would have to be quite a bit cheaper than an M390/M4 version. 0 -
quote:Originally posted by Carson:
If you guys who normally get one wouldn't because it had a steel that was not the newest kid on the block, it really would make it a limited edition would it not?
It doesn't have to be the newest steel... I would be perfectly happy with M2
0 -
quote:Originally posted by something:quote:Originally posted by Carson:
If you guys who normally get one wouldn't because it had a steel that was not the newest kid on the block, it really would make it a limited edition would it not?
It doesn't have to be the newest steel... I would be perfectly happy with M2
+1
0 -
quote:Originally posted by Lightning:
I feel so oppressed because I still like 440C...
I EDCed 440C for the past 7ish? years, until this spring when I switched to CPM3V. I only did it 'cause I had to though.0 -
quote:Originally posted by kirbysdl:quote:Originally posted by Lightning:
I feel so oppressed because I still like 440C...
I EDCed 440C for the past 7ish? years, until this spring when I switched to CPM3V. I only did it 'cause I had to though.
So what was that knife that served you for so long?0 -
quote:Originally posted by Lightning:quote:Originally posted by kirbysdl:quote:Originally posted by Lightning:
I feel so oppressed because I still like 440C...
I EDCed 440C for the past 7ish? years, until this spring when I switched to CPM3V. I only did it 'cause I had to though.
So what was that knife that served you for so long?
551 Grip =)0 -
To be honest, I'd probably only buy this in if it came in M390 or CPM-M4 as well. 0 -
quote:Originally posted by Big Old Boy:
update is it may not happen.BM keeps changing what we were told and now it may not happen at all.
OK, based on this new info, I spent the LE 707 money I had put aside on a 746-1201 - Now that the money is gone you can be assured that it WILL happen.0 -
IT'S a GO but what a fight. Our dealer called to say BM. wil do the m390 but it will not be here till this fall and I just hope by Christmas we all know how BM. works. will be 200 made and numbered blue alum. with cf insert and silver hardware. maybe a few in bk and a few serated we will see.I think around $180.so you all have time to save. 0 -
quote:Originally posted by Big Old Boy:
IT'S a GO but what a fight. Our dealer called to say BM. wil do the m390 but it will not be here till this fall and I just hope by Christmas we all know how BM. works. will be 200 made and numbered blue alum. with cf insert and silver hardware. maybe a few in bk and a few serated we will see.I think around $180.so you all have time to save.
That is awesome news BOB!
Thank you for all you have done to make this happen. It has obviously not been easy!0 -
Thanks! Am still in for the Satin P/E #4.
& Keep up the good work!
MCM0 -
Excellent! 0 -
Yep of course, two days later and it's a go. At least I have some time to save up again. Thanks B.O.B. 0 -
Yee Haw 0 -
My mom always said,a squeaky wheel gets the grease. Thanks for being persistent, B.O.B. 0 -
how about the deep pocket clip? and thanks B.O.B. 0 -
Thanks for the update B.O.B.
I'm really looking forward to this one!0 -
Holy crap really?!
I need one of these!!0 -
quote:Originally posted by Big Old Boy:
IT'S a GO but what a fight. Our dealer called to say BM. wil do the m390 but it will not be here till this fall and I just hope by Christmas we all know how BM. works. will be 200 made and numbered blue alum. with cf insert and silver hardware. maybe a few in bk and a few serated we will see.I think around $180.so you all have time to save.
Thanks B.O.B. - Now I know what to ask Santa to get me !0 -
Nice, can't wait for this one!
Knife funds are ready to go!0 -
B.O.B.
Awesome work!
Will you be starting a new post for a list?
Looking forward to this...
Cheers,
Russel0 -
I just want to bump this one cuz... I really, really want one of these!! 0 -
after Blade show I'll know a lot more and will post what I learn in a few weeks. 0
Please sign in to leave a comment.
Comments
285 comments