mblanton
- Total activity 27
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 13
Activity overview
Latest activity by mblanton-
mblanton commented,
I have a 721 SBT. Don't carry it very often - usually during hunting season. It's also one of my favorite choices when there is some heavy cutting to be done. The larger scales are easier on the...
-
mblanton commented,
940 and 525-M4.Michael
-
mblanton commented,
I have painted G10 before and then later wanted to return the scales to the standard black.Bead blasting after removing them from the knife (721) worked well.It will really depend on how exactly th...
-
mblanton commented,
That's about the same length I used when modifying the set screws. Easiest way I found was to measure the gap with calipers while the knife was assembled. If I remember correctly, I used 10-24 x ...
-
mblanton commented,
I didn't care for the solid Delrin spacer in my 525-M4 so I made a set of barrel spacers from cupped stainless steel set screws. Took a little grinding to get the length right, drilled them throug...
-
mblanton commented,
For the most part I carry two every day. Either a 940 or 525-M4 and a 556. 9/10 times when I need to cut something at work (tape, box, etc...) the 556 gets the call. Michael
-
mblanton commented,
525 M4 and 556 or 940.Like to have a knife in each front pocket easily in reach of right or left hand depending on the task.Michael
-
mblanton commented,
Have always liked knives. This is the first one I can remember having and using regularly and I still have it some 35 or so years later.My first Benchmade was a CQC7 (no longer have it). Another ...
-
mblanton commented,
Carrying my new 525BK in M4 that I received for father's day Here's a close-up of the factory hair-poppin' sharp edge.Michael
-
mblanton commented,
I carry a 940 in my left and 556 in my right pocket every day. I have the clips oriented so that the blades are against the seam of my pants to prevent opening as d_clark pointed out - a lesson I ...