Search

AFCK Medallion Solution

knivesforshoes

September 03, 2012 05:45

Pangs me when one is missing on a sweet old school AFCK, but this ain't a bad fix:

Comments

11 comments

digdeepordie

September 03, 2012 07:02
Classy! I really like that.

I was planning to use putty and a sticker from a nice piece of fruit
0
geocyclist

September 03, 2012 15:08
+1
0
loonybin

September 03, 2012 15:49
Hmm... I need to see if a 9mm will work for the mini-AFCK.
0
bigoldboy

September 03, 2012 16:12
just don't use to much supper glue I about ruined my 812-1001 the medallion fell out and like a fool I used to much glue.
0
David Lerman Contractor

September 03, 2012 20:11
quote:

Originally posted by Big Old Boy:
just don't use to much supper glue I about ruined my 812-1001 the medallion fell out and like a fool I used to much glue.

I thought the guy from the BM booth said he would fix it for you.
0
otacon

September 03, 2012 20:39
That cool KFS
0
darrenmh

September 04, 2012 01:43
Very cool.
0
bigoldboy

September 04, 2012 02:00
W30, he did but I just can't part with it for 2 weeks.
0
knivesforshoes

September 04, 2012 07:09
quote:

Originally posted by loonybin:
Hmm... I need to see if a 9mm will work for the mini-AFCK.

I felt the 9mm was too small. There is still a little play even with the .45. But maybe it would be unoticed if well centered in the indent--just be careful the glue does not drip through the hole onto the blade!
0
tucker

September 04, 2012 13:14
Luv it! Creative, cool, and very effective!
0
loonybin

September 05, 2012 12:13
quote:

Originally posted by knives for shoes:

quote:

Originally posted by loonybin:
Hmm... I need to see if a 9mm will work for the mini-AFCK.

I felt the 9mm was too small. There is still a little play even with the .45. But maybe it would be unoticed if well centered in the indent--just be careful the glue does not drip through the hole onto the blade!

I think the medallion on the mini-AFCK is smaller than on the full-size AFCK, but I could be wrong. If it isn't, I have some .45ACP laying around I can use. Also, the liners for the mini- don't have holes in them. I'd end up gluing it to the Ti liners I put in mine-- not good, but not as bad as gluing it to the blade!
0