Skip to main content

Search

3300 Infidel Scratches

Comments

14 comments

  • bm-butterfly
    I just noticed that my Infidel is sharpened like a Pagan-chisel. Only sharpened on one side.
    Is this normal?

    Also a bit of wire on the bead at one spot
    0
  • bmkjason
    quote:
    Originally posted by BM-Butterfly:
    I just noticed that my Infidel is sharpened like a Pagan-chisel. Only sharpened on one side.
    Is this normal?



    Yeah, all Infidels are chisel-ground. For the primary edge, that is.
    0
  • bm-butterfly
    BM Customer Service Nolan Kidwell says this, "All 4...just like a the regular 3300...the pagan is the chisel grind."

    My dealer says this, "No all are chisel grind 1 sided only"

    Vids I have watched show all four edges sharpened.

    Look up the CAD thread where Keyman posted the internals of his 3300. Sharpened only on one side.
    0
  • bm-butterfly
    OK, actually spoke with Nolan.
    The vids I see are where the owner has put a beveled edge on all four sides.
    BM stopped doing that six years ago.
    So the sharpening of my 3300 is correct.

    It is unusually dull for a BM knife.
    0
  • bmkjason
    Sounds like there's some confusion between the primary and secondary bevels.

    ALL the OTFs from both the Infidel and Pagan families are chisel-ground when SHARPENED.

    The Pagan is actually chisel-ground when beveled as well.
    0
  • bm-butterfly
    And the confusion is probably from the person who farts in my underwear.

    Uhh,. . . . that would be me by the way
    Big Grin
    0
  • bmkjason
    Psssh... that's what YOU think..

    Big Grin
    0
  • martymcfly
    LOL
    Big Grin

    I certainly hope there's not anyone else streaking a BM in you underwear, BM.
    Razzer
    0
  • bmkjason
    Mmmm.. Initialism play. It's like a pun, but with letters.
    0
  • bm-butterfly
    Not much action here on the Click Forum.

    So my brand new 3300BK-1701 is off to BKC to replace the blade with the same number and BM markings.
    Hopefully!
    Take care of the scratch/alignment problem. And send me a sharp one.
    It was my first BM knife that would NOT cut the hair off my arm or pass the thumbnail test.

    Missing the Click - Click
    0
  • benchieking
    I already brought this up and warned people it was going to happen. Jason ignored the issue and didn't respond to my concerns so , I told them so I guess? I guess they will be replacing blades all year for free cause if any of mine are scratching they are going back
    0
  • benchieking
    So far so good, mine only get cycled once and put on display though. Razor Sharp
    0
  • 18415
    I've got a couple infidels both coated and not coated and have never had a scratching issue. I would assume yours is a unique issue as to me expected every once in a blue moon. Benchmade should make it right as they always do.
    0
  • bm-butterfly
    quote:
    Originally posted by 18415:
    I've got a couple infidels both coated and not coated and have never had a scratching issue. I would assume yours is a unique issue as to me expected every once in a blue moon. Benchmade should make it right as they always do.

    They fixed it. It took two months.
    My dealer received five. Three of the five were getting scratches.
    0

Please sign in to leave a comment.

//add button to launch chat
Powered by Zendesk