Blade Show 2013 Forum Lunch
Hello everyone! For those of you attending this years Blade Show in Atlanta, GA we will be hosting our Forum Lunch again at Jocks & Jills, 11:30am on Saturday June 1st. We have 13 slots open and are first come first reserved. So please respond to this post if you would like to attend. Mikey from our special projects team will be there with concept pieces to show off. We will also have Austin from our product services department to answer questions about warranty, Lifesharp, and lasermarking. Please let us know if you are able to attend. Thank you!
RSVP List:
1: DJ
2: MCM
3: minkeyman
4: ACAR
5: Bigdaddyw20
6: amethyst
7: Stainz
8: TDOGG
9: Geocyclist
10: Chip
11: w30hammer
12: Randy Yerkes
13: Steve Kennedy
14: Roger
Thank you all for RSVP'ing for our lunch! See you then!
RSVP List:
1: DJ
2: MCM
3: minkeyman
4: ACAR
5: Bigdaddyw20
6: amethyst
7: Stainz
8: TDOGG
9: Geocyclist
10: Chip
11: w30hammer
12: Randy Yerkes
13: Steve Kennedy
14: Roger
Thank you all for RSVP'ing for our lunch! See you then!
0
-
Hi Ryan,
I just spoke with DJ. He's out on a job and can't respond to this post, so he asked me to RSVP for him (DJ) and MCM.
DJ thought MCM is in transit to the show and will miss this post, so please count on those two for the lunch.0 -
I'd love to get to attend this year. Save me a spot please if it's not too late. Thanks! Looking forward to seeing you guys! 0 -
I'm pumped I'll actually get to make it to the lunch this year. I miss it every year. Oh and love the Joe Walsh quote fastjan. He's my favorite guitarist out there. I play a lot of his stuff. 0 -
Count me in. 0 -
Made it! Am boxing up all the old dusty Le's and disco models here at KW. Thanks for counting me in! And thanks for including my "roomate" dj! 
0 -
I can attend. Jock & Jill's is around the corner from the expo hall, correct? 0 -
Yes it is,
1 Galleria Parkway
Atlanta, GA 303390 -
Thanks Fastjan for forwarding the message ......I was working. 0 -
Please count me in too 
Thanks
amethyst0 -
Randy Yerkes, Mark's Outdoors knife buyer, would like to attend with me again this year, if space is available. Thanks!
John (aka Stainz)
(I was the fat old guy at the end of the table with an orange Auburn shirt and shorts - probably be similarly attired!)0 -
I'll have one of those empty seats please sir. 0 -
quote:Originally posted by Stainz:
Randy Yerkes, Mark's Outdoors knife buyer, would like to attend with me again this year, if space is available. Thanks!
John (aka Stainz)
(I was the fat old guy at the end of the table with an orange Auburn shirt and shorts - probably be similarly attired!)
Ryan - I think Stainz wanted on the list too.0 -
quote:Originally posted by Bigdaddyw20:quote:Originally posted by Stainz:
Randy Yerkes, Mark's Outdoors knife buyer, would like to attend with me again this year, if space is available. Thanks!
John (aka Stainz)
(I was the fat old guy at the end of the table with an orange Auburn shirt and shorts - probably be similarly attired!)
Ryan - I think Stainz wanted on the list too.
Thanks, added0 -
My dad and I make the trip to Blade every year and all he carries are Benchmade Griptillians. He is not involved on the forum (or any forum, or fb, etc.) but loves BM blades. Could he join me at the lunch or is it just for active forum users? If he could come it would be great! 0 -
Oh, and his name is Steve Kennedy if he is able to come. 0 -
quote:Originally posted by minkeyman:
Oh, and his name is Steve Kennedy if he is able to come.
Ok so I added his name and Randy to the bottom of the list. They are welcome to come but I want to make sure it is open to forum members first. If we run out of space and we cannot extend the guest list we will have to cut them. I think we will be ok though.0 -
Ok thanks. 0 -
Please add Roger from KW. Do we know when/where? 0 -
Saturday 11:30 at jocks and jills 0 -
Thanks! 0 -
Iam gonna order a 740 LE with a side of 705 LE ...........LOL 0 -
I will be there, sign me up. Looking forward to meeting everyone.
Now just have to decide which knife/s to carry.0 -
I would like to join the lunch. While not a regular contributor, I am a regular reader.
Also, I wanted a little information on the Show. I have not attended before and I discussed a gold class 706 without any blade markings with you, Ryan, over the phone. Is that something I could bring to the show to have you look at, or is it more just for manufacturers and retailers to show their wares?
With thanks,
Chip0 -
I had planned on attending this year with my Son, but well, you know how things go...
Please raise a glass to Pete for me.
Prof.0 -
Chip I'd be more than happy to take a look at your 706 0 -
Looking forward to meeting you guys! I'm guessing I'll leave blade with another Benchmade...like I do every year two years ago they were offering free engraving and I got my 515 Rant engraved with my username on here. I'm thinking another small folder this year...0 -
Cant believe I missed out on getting on the list..Have not missed one for the last 4 or 5 years. 0 -
minkeyman, etc;
If you are fond of the Grip and Mel Pardue's other designs, look for Mel to be at the show with a table, if his health permits. His custom knives are unreal - I should have the one with me Saturday at lunch which he made for me before last Christmas. A true artisan and a nice guy, too. Randy tries to keep a few in stock, but they go fast. He keeps the largest Benchmade display and stock I've ever seen in a store at Mark's. It's worth a drive if you are in or near C.A. (Central Alabama).
John (aka Stainz)0 -
Sadly won't make the show this year but go ahead and accept my RSVP for the 2014 Lunch
scmedic0 -
quote:Originally posted by w30hammer:
Cant believe I missed out on getting on the list..Have not missed one for the last 4 or 5 years.
w30hammer,
You are welcome to attend. We can always make room for one more.0
Please sign in to leave a comment.
Comments
43 comments