Triage / Stryker II
I am not sure if this has come up in conversation before but I will ask now. Are the Triage parts and the Stryker II parts interchangeable? In particular are the blades interchangeable?
0
-
Somebody and I asked that earlier. Never really got a good answer. Would love to see a tanto triage. No need for a safety blade with the hook right there. I understand it, but don't agree 0 -
I would be surprised if they were not interchangeable, but I've been wrong before. 0 -
Well, those two has different blade thickness and handle thickness. I don't think they are identical / suited for blade swap. AXIS lock is very low tolerance in dimension discrepancy, so I would not say they are interchangeable.
Triage:
Blade Length: 3.50"
Blade Thickness: 0.130"
Handle Thickness: 0.450"
Overall Length: 8.20"
Closed Length: 4.70"
Stryker 908
Blade Length: 3.57"
Blade Thickness: 0.104"
Handle Thickness: 0.400"
Overall Length: 8.29"
Closed Length: 4.72"
(Edit: Yeah, Stryker II 909 has a bit more thickness.)
Blade Length: 3.57"
Blade Thickness: 0.124"
Handle Thickness: 0.470"0 -
Thanks MF, I didn't check the specs, I just saw the similarities in the handles and thought maybe. 0 -
Nah, the 909/8 blade thickness is .124 or so...
The web site lists the Triage blade thickness as .124 for the Auto Triage and .13" for the Triage. Blade lengths vary from 3.3" to 3.58".
I'm pretty sure the blades would swap. I guess there is always the chance that there would be some difference, but there is a good chance for success. If you have them both, it would be worth a try. If not, I guess it would be an expensive experiment if it failed.0 -
I'd like a 908 blade in a Triage handle with the hook cutter replaced with a bottle opener. 
0 -
quote:Originally posted by Po:
Nah, the 909/8 blade thickness is .124 or so...
The web site lists the Triage blade thickness as .124 for the Auto Triage and .13" for the Triage. Blade lengths vary from 3.3" to 3.58".
I'm pretty sure the blades would swap. I guess there is always the chance that there would be some difference, but there is a good chance for success. If you have them both, it would be worth a try. If not, I guess it would be an expensive experiment if it failed.
Sources
Triage 915: http://www.benchmade.com/products/915
Stryker II 908: http://www.benchmade.com/products/908
Striker 909: http://www.benchmade.com/products/909
Yeah, 909 has a bit more thickness.
Blade Length: 3.57"
Blade Thickness: 0.124"
Handle Thickness: 0.470"
So 909 seems similar. As for the pivot radius, there are no record. Not sure about the radius and stop pin position.0 -
Anybody know what the clip screw spacing is on the 908/909? I wouldn't mind a satin clip and thought I would check some of the parts websites to see what they have. 0 -
quote:Originally posted by Glocker199:
I'd like a 908 blade in a Triage handle with the hook cutter replaced with a bottle opener.
+1, make it a big stout combo bottle opener/screwdriver and I am right there with you.0 -
quote:Originally posted by Boobar:
Anybody know what the clip screw spacing is on the 908/909?...
I believe the deep pocket clip is interchangeable with the standard clips, so you could measure the hole spacing on any of your Benchmades.0 -
quote:Originally posted by Po:quote:Originally posted by Boobar:
Anybody know what the clip screw spacing is on the 908/909?...
I believe the deep pocket clip is interchangeable with the standard clips, so you could measure the hole spacing on any of your Benchmades.
No, the hole spacing on the Triage/Stryker is wider. I wish Benchmade had used the Contego/Adamas style deep carry clip.0 -
Hey, thanks for the correction, Glocker. 0
Please sign in to leave a comment.
Comments
12 comments